Insurance claims can be a complicated undertaking. But with high-quality drone inspections, insurance companies can produce more detailed reports faster and more cost-effectively. Engineers with Drones provide custom drone inspections for insurance companies. Drones are fast and can safely reach hard-to-reach structures and even the most difficult locations. This means that inspectors are not put in dangerous positions and the safety risks that can arise are reduced.
Large areas of land can easily be photographed, examined, and documented by drones to capture an exact reading of their geography, boarders, and vegetation cover. This allows you to record a professional and accurate status of your land at a given point in time, without having to step foot on the ground.
Our drones can monitor huge areas of land in a single flight, something that was previously only possible via satellite. Drones give you higher quality imagery and more useable survey data, faster and with fewer challenges.
Using drones equipped with 3D modelling technology, you can quickly and accurately inspect stockpile volumes, eliminate guesswork from tonnage measurements, and track the progress of your site over time.
The use of drone 3D modelling technologies gives you the opportunity to inspect a digital twin of a an asset from the comfort of your office. This detailed replica can be inspected at a minute level, allowing you to make a record of any areas that are in need of attention. Issues such as poorly executed repairs, general damage and other potential weaknesses can be shared with your employees, suppliers and other shareholders at the click of a button.
As licensed engineers, we also provide the expertise, understanding, and knowledge necessary to carry out a thorough inspection, with deliverables to match. Our skilled engineers are at the ready.
The Irish Aviation Authority has awarded Engineers with Drones full approval in accordance with the most recent European-wide EASA regulations.
To ensure that you always get the best possible service and cutting-edge deliverables, we purchase the most up-to-date drone technology as soon as it's available.
The operation of Engineers With Drones is governed by a comprehensive HSSE system. Our guiding principles are to reduce risk through rigorous assessment, and to maintain a high level of staff education and training.
We have 6.5 million in public and product liability insurance, and 13 million in employers' liability insurance. Engineers with Drones are fully insured to fly wherever you need.
As we're situated in Ireland, we can respond to your needs quickly, with zero travel complications.
As seasoned engineers in the field, we are aware of the trouble that shoddy reports and deliverables can create. For this reason, we provide you with exactly what you require.
Thanks to our fast turnaround times, your entire project can be completed in a fraction of the time of traditional methods, without any compromise in the quality of your deliverables.
In addition to quadrupling the resolution of an HD camera, 4K also gives you quicker frame rates, incredible contrast variations, and expanded colours. VR video takes the level of immersion and clarity to the next level.
Drone inspections take up less of your manhours and resources than traditional inspections, giving you a faster and more budget-friendly return on your investment.
Our equipment won't touch or even go close to your assets. Our high-resolution cameras use optical zoom to give extreme close-up views while staying a safe distance away.
We use cutting-edge technologies to detect problems that would otherwise be invisible. These include ultra-HD photography/video, LIDAR and thermal imaging.
Drones aren't just for flying up in the sky. Our specialist drones can fly into confined spaces like chimneys and boilers to look for issues that would otherwise be inaccessible.
Thermal IR technology and ultra HD allow our engineers to get a view that it not available to the naked eye. From a safe distance, we can find defects and insights that are only visible with a drone.
Need us there in a hurry? No problem. Let us know what you need, and we can be there on the same day. After all, sometimes the problem just won't wait.
Sometimes the brief can change even in real-time. If need be, you can be stood there right next to the drone operator, directing them as the situation develops.
The safety of your personnel and our own is paramount, and we place it at the forefront of our company culture. Ask us about our HSSE systems and practices.
Insurance claims can be complicated undertakings. However, using high-quality drone inspections, insurance companies can compile more detailed reports in a faster and more cost-efficient way. Engineers with Drones supply tailor-made aerial drone inspection services for insurance companies. Drones are fast and can safely access hard-to-reach structures and even the most difficult locations. This means that inspectors are not put in dangerous positions and the safety risks that can incur are reduced.
At Engineers With Drones our pilots are all fully licensed and certified. They will capture high-resolution photo and video data in a matter of minutes. This data can be used to accurately assess the current condition of a property or asset and process insurance claims faster and more efficiently. At the same time using drones will eliminate the safety risks of traditional methods. Claim assessment inspectors won't have to access hazardous areas. Additionally, the increase in speed and quality of the findings gives insurance companies both peace of mind and a higher return on investment.
We take emails, phone calls, messages, everything! If you are unsure of what's possible we are happy to advise, the most important thing is to get in touch. We would be delighted to answer any questions you may have.
With drones, it's best to begin where you want to end up. What sort of deliverable would you like when it's all finished? If you are not sure then we can advise. We can look at what you would like and work backwards from there.
Once we have agreed on what is to be done, the scope of work is set and a price is agreed upon. We feel it is vital that everyone knows what they are getting and what they are paying for it. There should be no confusion.
Once we have confirmation you are happy to proceed, we start the ball rolling. We organise things like RAMS, site permits, Air Traffic Control clearance and much more. Basically, we generate everything needed to turn up on-site with all our ducks in a row.
Next, we do the work on site. We have the gear, we have the know-how, so now it's time to get the job done. This can sometimes be affected by the weather, but for the most part, we get the job done on the date specified.
This is where we take what we generated in the field and turn it into a final deliverable for you. This can be anything from the raw data itself, to fully processed Orthophotos, condition reports, CAD line work or thermal imagery.
The final step is the handover of the deliverables. We tend to use a cloud-based service, so you can access your data anywhere. We can also tie into your existing systems if that is more convenient.
Spoiler alert: we don't do weddings! We're professional engineers who have learned to fly drones really well. If you're looking for a photo of your garden or a swooshing shot of your wedding reception, we're probably not the right people for you. But if you need an engineer's eyes and experience, combined with next-generation UAV technology and industry leading deliverables, then you've come to the right place.
Capture high-quality imagery of your assets from never before seen vantage points.Find out more
Detect abnormalities within your assets that are otherwise invisible to the naked eye.Find out more
Record incredibly detailed elevation data to aid in ultra-precise measurements and calculations.Find out more
Mitigate the risk factors of traditional confined space inspections, without compromising on quality.Find out more
We purchase the latest drones as they come on the market to ensure you are getting the highest quality service from us at all times. Here is a quick look at what we would be most likely to use for a typical drone insurance service.
Our flagship drone: The M300 RTK by DJI is the premier enterprise-level inspection drone on the market. With a flight time of up to 55 minutes, lots of built-in redundancy, and a host of payloads to choose from, this is our go-to UAV for inspection work. When coupled with the Zenmuse H20T camera, it is capable of safely inspecting high-value assets at a stand-off range.
The confined space master: The Stereo 2 by Multinnov is the cutting-edge in confined space and indoor inspection drone technology. Eliminating the need to send personnel into hazardous locations, the Multinnov Stereo 2 can be deployed at a fraction of the cost, and with zero downtime. This is a drone designed from the ground up to get into restrictive and hard-to-reach places.